XFLY EAGLE 40mm EDF FLYING WING WITHOUT TX/RX/BATTERY WITH GYRO - GREEN

XFly Model has been releasing new RC airplanes with continued innovations, and now it is time for a racing aircraft! XFly is proud to announce their first hand launch racer, the Eagle twin 40mm EDF jet. It features special flying wing configuration, newly developed 40mm EDF power system on both wingtips and a large battery bay in the middle of the fuselage.

Powered by a 4S Lipo battery, the factory-installed twin 40mm EDFs allow the plane to exceed 1:1.5 power-to-weight ratio and take off with ease by hand launches. The wear-resistant plastic components under the belly and the wingtips allow the plane to land on rough surfaces. With a streamlined, aerodynamic profile, a special EDF configuration and setup assisted by the custom gyro (optional), the Eagle is capable of delivering differential speeds, performing rolls, flat spins, inverted flat spins and other challenging maneuvers, with a top speed of 110MPH+. It is completely factory-assembled and ready to fly right out of the box. There are two eye-catching color schemes available that you won't be worried about losing sight of the plane in the sky.

If you are seeking a hand launch racing aircraft, look no further than the XFly Eagle!

Features

• Robust EPO construction.
• Special flying wing configuration and newly developed 40mm EDF power system on both wingtips.
• Large battery bay for a 4S 1800-2200mAh Lipo battery.
• Outstanding power-to-weight ratio.
• Easy hand launches and safe landings on rough surfaces.
• Capable of delivering differential speeds and performing rolls, flat spins, inverted flat spins and other challenging maneuvers, when assisted by the custom gyro. Top speed can reach 110MPH+.
• Completely factory-assembled and ready to fly right out of the box.
• Available in two eye-catching color schemes.

Specifications

Wingspan: 1019mm/40in
Overall Length: 383mm/15in
Flying Weight: 650g
Motor Size: 1413-KV5000*2
ESC: 20A*2
Servo: 9g servos*2
Channels: 5 channel - aileron, elevator, throttle, rudder, gyro
CG: 162mm from the leading edge
Wing Load: 35g/dm²
Wing Area: 19.5dm²
Recommended Battery: 4S 2200-2600mAh
Battery Connector: XT60
Approx Flying Duration: 5-10 mins
Build & Test Time: 3 mins
Skill Level: Intermediate/Advanced
Age Level: 14 years +
Flap: No
LED: No
Retract: No
Landing Gear: No
EDF Size: Twin 40mm EDF 12-blade

For further information: on flying your RC plane in a safe and responsible manner please check out www.bmfa.org

Safe flying is YOUR responsibility.

Update 01/01/26: The laws have changed regarding operating drones and model aircraft in the UK.

What you need to do:
You must take a theory test and register with the CAA before flying most drones or model aircraft outdoors in the UK. 
There are two requirements and you may need to meet both: 

• Pass a theory test to get a Flyer ID. 

This makes sure you know how to fly safely and legally. 

• Register with the CAA for an Operator ID. 

This registers you as someone who is responsible for a drone or model aircraft. 
Most people get their Flyer ID and Operator ID at the same time.

It is against the law to fly a drone or model aircraft without having the required IDs.
You can also be fined for breaking the law when flying. In the most serious cases, you could be sent to prison. 

The requirements are based on the weight or class of your drone or model aircraft. 

Registration requirements for drones and model aircraft:

See:
UK Civil Aviation Authority.

For full details please visit:
https://www.caa.co.uk/drones/getting-started-with-drones-and-model-aircraft/drone-code/drone-code-overview/

Be Safe - Be Lawful - Be Drone And Model Aircraft Aware!

We fully encourage safe and responsible flying

We recommend you visit the CAA website for full information on safe and responsible flying.