XFly Model has been releasing new RC airplanes with continued innovations, and now it is time for a racing aircraft! XFly is proud to announce their first hand launch racer, the Eagle twin 40mm EDF jet. It features special flying wing configuration, newly developed 40mm EDF power system on both wingtips and a large battery bay in the middle of the fuselage.
Powered by a 4S Lipo battery, the factory-installed twin 40mm EDFs allow the plane to exceed 1:1.5 power-to-weight ratio and take off with ease by hand launches. The wear-resistant plastic components under the belly and the wingtips allow the plane to land on rough surfaces. With a streamlined, aerodynamic profile, a special EDF configuration and setup assisted by the custom gyro (optional), the Eagle is capable of delivering differential speeds, performing rolls, flat spins, inverted flat spins and other challenging maneuvers, with a top speed of 110MPH+. It is completely factory-assembled and ready to fly right out of the box. There are two eye-catching color schemes available that you won't be worried about losing sight of the plane in the sky.
If you are seeking a hand launch racing aircraft, look no further than the XFly Eagle!
Wingspan: 1019mm/40in
Overall Length: 383mm/15in
Flying Weight: 650g
Motor Size: 1413-KV5000*2
ESC: 20A*2
Servo: 9g servos*2
Channels: 5 channel - aileron, elevator, throttle, rudder, gyro
CG: 162mm from the leading edge
Wing Load: 35g/dm²
Wing Area: 19.5dm²
Recommended Battery: 4S 2200 -2600mAh
Approx Flying Duration: 5-10 mins
Build & Test Time: 3 mins
Skill Level: Intermediate/Advanced
Age Level: 14 years +
Flap: No
LED: No
Retract: No
Landing Gear: No
EDF Size: Twin 40mm EDF 12-blade
For further information: on flying your RC plane in a safe and responsible manner please check out www.bmfa.org
There are NO reviews of the XFLY EAGLE 40mm EDF FLYING WING WITHOUT TX/RX/BATTERY WITH GYRO - RED yet!
Be the first to write a review