XFLY SWIFT X2100 TWIN GLIDER WITHOUT TX/RX/BATT

Derived from XFly Swift 2100 glider, X2100 is a FPV carrier aircraft designed by XFly Model team specially for FPV hobbyists. The X2100 adopts a glider layout design with a high aspect ratio, which has natural advantages in flight time and flight stability. Twin power systems allow it to easily achieve 1:1 thrust-to-weight ratio, and the large wingspan design of the aircraft provides ample space for future payload additions. Capacious battery compartment allows for common 4s Lipo batteries or 21700 batteries for optimised flight times.

All components of the X2100 can be assembled without glue and fixed with screws, featuring a safe and reliable design. A gimbal installation position is reserved on the nose section of the aircraft for a standard two-axis gimbal, or it can be modified by yourself. Twin powers distributed on each side, plus the reasonable match of axle distance and propeller, free you from the risk of propeller damage while landing.

Features

• The layout design of the glider has natural advantages in flight time and flight stability.
• Twin power systems and the large wingspan design providing ample space for future payload additions.
• Capacious battery compartment allowing for common 4S LiPo batteries or 21700 batteries for optimised flight times.
• All components can be assembled without glue and fixed with screws, featuring a safe and reliable design.
• A gimbal installation position is reserved on the nose section of the aircraft for a standard two-axis gimbal, or it can be modified by yourself.

Specifications

Wingspan: 2100mm/82.7''
Overall Length: 1050mm/41.3''
Flying Weight: 1500g
Motor Size: 2212-KV1400 *2
ESC: 40A *2
Servo: 9g servo*6
Channels: 5CH- aileron, elevator, throttle, rudder, flap
CG: 50mm from the leading edge
Wing Load: 38.5g/dm²
Wing Area: 35dm²
Recommended Battery: 4S 2600-3300mAh, 21700-4S1P-5000mAh, (21700-4S2P-10000mAh)
Approx Flying Duration: 10-30 mins
Assembly Time: 15 mins
Skill Level: Beginner
Age Level: 14 years +
Flap: Yes
Retract: No
Prop Size: 8x5'' *2

Safe flying is YOUR responsibility.

Update 01/01/26: The laws have changed regarding operating drones and model aircraft in the UK.

What you need to do:
You must take a theory test and register with the CAA before flying most drones or model aircraft outdoors in the UK. 
There are two requirements and you may need to meet both: 

• Pass a theory test to get a Flyer ID. 

This makes sure you know how to fly safely and legally. 

• Register with the CAA for an Operator ID. 

This registers you as someone who is responsible for a drone or model aircraft. 
Most people get their Flyer ID and Operator ID at the same time.

It is against the law to fly a drone or model aircraft without having the required IDs.
You can also be fined for breaking the law when flying. In the most serious cases, you could be sent to prison. 

The requirements are based on the weight or class of your drone or model aircraft. 

Registration requirements for drones and model aircraft:

See:
UK Civil Aviation Authority.

For full details please visit:
https://www.caa.co.uk/drones/getting-started-with-drones-and-model-aircraft/drone-code/drone-code-overview/

Be Safe - Be Lawful - Be Drone And Model Aircraft Aware!

We fully encourage safe and responsible flying

We recommend you visit the CAA website for full information on safe and responsible flying.