VOLANTEX ASW28 2600MM GLIDER w/ABS FUSELAGE ARTF

This V2 ASW-28 is a hybrid foam and plastic model with a few nice upgrades over the V1. The wings and tail are EPO foam while the fuselage is blow molded plastic which should give it a good blend of durability and performance. You'll need to provide your own radio system and a 3S 1500mAH lipo battery to finish it off.

The battery can be accessed after removing the canopy that is secured with snap locks. The wings now have two spars to provide extra rigidity during loops and high bank turns. The wings are easier to install as well with a plastic latch to secure them in place. The room inside the fuse has been increased over the V1 so you can add FPV gear if that's your thing. We've also added a wheel under the fuselage for rolling landings.

Features

• Quick, easy assembly, no glue required
• Beautiful and superb scale design
• Plastic Unibody design make it much more durable
• Light weight and durable EPO construction 
• Big space fuselage make FPV become easier
• New simpler connections wings
• Additional strengthening wings
• Wheel for easy landings

Specifications

Wingspan: 2600mm (102.5 in)
Overall Length: 1132mm (44.6 in)
Flying Weight(without battery): 1050g
Prop Size: 1060 Folding Propeller
Motor Size: 4023 powerful out runner brushless motor
Speed Control: Easy-Plug 30A Switch-mode BEC brushless ESC
Servo: 9-gram Servo * 6pcs
Recommended Battery (Required): 11.1V 1800mAh ~ 2200mAh Li-Po
Radio (Required): 2.4Ghz 6-Channels
Charger (Required): 3S LiPo balancing charger, 0.5A
Ailerons: Yes
Flaps: Yes
Minimum Age Recommendation: 14 years
Experience Level: Beginner~Expert
Recommended Environment: Outdoor
Assembly Time: Less than 30min
Is Assembly Required: Yes

Required To Complete

• Transmitter
• Receiver
• Battery
• Charger

For further information: on flying your RC plane in a safe and responsible manner please check out www.bmfa.org

Safe flying is YOUR responsibility.

Update 01/01/26: The laws have changed regarding operating drones and model aircraft in the UK.

What you need to do:
You must take a theory test and register with the CAA before flying most drones or model aircraft outdoors in the UK. 
There are two requirements and you may need to meet both: 

• Pass a theory test to get a Flyer ID. 

This makes sure you know how to fly safely and legally. 

• Register with the CAA for an Operator ID. 

This registers you as someone who is responsible for a drone or model aircraft. 
Most people get their Flyer ID and Operator ID at the same time.

It is against the law to fly a drone or model aircraft without having the required IDs.
You can also be fined for breaking the law when flying. In the most serious cases, you could be sent to prison. 

The requirements are based on the weight or class of your drone or model aircraft. 

Registration requirements for drones and model aircraft:

See:
UK Civil Aviation Authority.

For full details please visit:
https://www.caa.co.uk/drones/getting-started-with-drones-and-model-aircraft/drone-code/drone-code-overview/

Be Safe - Be Lawful - Be Drone And Model Aircraft Aware!

We fully encourage safe and responsible flying

We recommend you visit the CAA website for full information on safe and responsible flying.