CRAWLER PARK RC CRAWLER SETUP SYSTEM FOR 1/10 & 1/12

With this article we invite you to raise the level of your rc crawler 1/10 scale, and the most incredible, without leaving home, in your room, living room or garage, at any time and in a few minutes you will test your rc crawler like a professional driver.

Are you already a super rc crawler driver?

Well, it's time to evolve your car to overcome the most demanding and extreme challenges.

We present the first rc crawler settings and adjustment table on the market, calculate the measurements and angles of your radio control car to see the capabilities and track in detail the evolution of each of the settings and accessories you install, at the time making the comparison with other cars in a precise, professional and equal conditions.

With the “RC CRAWLER SET-UP SYSTEM” table you will be able to accurately measure the following properties of your 1/24 and 1/18 scale rc crawler car:

• Maximum front and rear suspension travel on both sides, both in extension and compression.
• Front attack angle.
• Rear departure angle.
• Steering angle of rotation.
• Wheelbase distance between axles.
• Width distance between axles.
• Maximum inclination limit angle of overturning in lateral passage.
• Maximum inclination limit angle of vertical tipping uphill.
• Maximum inclination limit angle of vertical overturning in descent.
• Weight distribution in front vs back.
• Weight distribution on the left side vs right side.

You will enjoy assembling the obstacles made of 100% high-quality wood, from the beginning. You will receive a board with the pre-cut pieces, and you will only have to press slightly to remove them and carry on with the easy 3D assembly pieces, it’s not necessary to use adhesives or glues. Check the assembly instructions by scanning the QR code printed on the board. 

Before starting the game, read the documentation inside the box with the assembly instructions, warnings and maintenance of the product.

Attention! Be careful with your hands during the process of removing the pre-cut pieces from the wooden board, sharp parts may be exposed.

• Our product range doesn’t include cars.
• Suitable for 1/12 & 1/10.
• Our range of products has been approved and certified in compliance with all safety measures, risk assessment and environmentally friendly recycling criteria.
• Product recommended for people over 14 years old.

Specifications

Scale:1/10 scale & 1/12 Scale
Difficulty level: 5 WINNER
Suitable for cars with a maximum width: 11.4in / 290mm