Pro-Line Logo


  • Part Number: PRO1020610
  • Brand: Pro-Line
  • Availability: Out of stock Expected: TBC
    Email me when in stock
    Check out Shop Finder for local RC shops
RRP : £74.99 Where To Buy?


This is a pair of Menace HP 3.8" tyres. Pro-Line Menace tyres are 1:1 racing-inspired tread designed to give your 1/8 Monster Truck massive traction on your street, parking lot, or track.

The Menace HP tyres are BELTED to handle extreme power and high speeds with ease. No tyre ballooning here! Transform the handling of your truck with the low-profile carcass, deep grooves, and long-lasting compound, also great for speed runs! These tyres and Raid 3.8" wheels have been developed from the ground up to be lightweight and durable enough to handle extreme bashing with your KRATON™ 6S, KRATON™ 4S, MAXX®, or whatever other 17mm-hex rigs you run, to give you the best all-around bashing experience possible.

The Menace HP 3.8" tyres come pre-mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tyres! These Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (PRO634500). The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the pre-mounted Menace tyres now!

Please Note: That the Menace HP tyres have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. For the Menace HP tyres that is 75 mph or about 4,500 RPM. Over-revving your Menace HP tyres could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tyres or holding the throttle open while one, two, or three of your tyres are stopped, which substantially increases the RPM sent to the free-spinning tyre or tyres.*

Please Note: All tyres & wheels are sold in pairs, unless otherwise noted.


Tyre Features

  • Lightweight and Durable
  • BELTED tyre Handles Extreme Power and High Speeds with Ease
  • Racing-inspired Tread and Low-Profile Carcass, Great for Speed-Runs
  • Maximum Long Lasting Street Traction
  • Foam Inserts Included
  • Made in the USA, since 1982

Wheel Features

  • Removable Hexes Allow you to Easily Replace Damaged Hexes
  • 17mm Wide Offset 8x32 Hexes are Included
  • Upgrade your Hex to 17mm Aluminum
  • Wheel Made from High-strength, Durable DuPont Nylon Material
  • Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels
  • M3 Wheel Hex Hardware Included
  • Made in the USA, since 1982


Package Type: Pre-Mounted
Tyre Type: Street
Track Surface: Street / All-road
Wheel Position: Front/Rear
Insert Material: Open Cell
Product Height: 5.55" (141 mm)
Quantity Option: 2 in a package
tyre Compound: Medium
Wheel Hex Size: 17mm
Inner tyre / Outer Wheel Diameter: 3.8 in
Product Width: 3.3" (84 mm)
Tyre Tread: Menace HP BELTED
Vehicle Type: Monster Truck
Compound / Hardness: Medium
Colour: Black
Scale: 1/8
Wheel Type: Raid


  • KRATON™ 6S (ARA8608V5, ARA106053)
  • KRATON™ 4S (ARA4408V2)
  • TALION™ 6S (ARA8707)
  • MAXX®
  • Other 1/8 and 1/10 Vehicles with 17mm Hex

What's Included

  • 2 x Menace HP BELTED 3.8" Street tyres Mounted on Raid Black 8x32 Removable Hex 17mm Wheels
  • 2 x Foam Inserts

KEY: Out of stock OUT OF STOCK Only a few remaining VERY LOW STOCK Low stock LOW STOCK In Stock IN STOCK

Related Products


There are NO reviews of the PROLINE MENACE HP 3.8" BELTED ON RAID BLACK 8x32 HEX 17MM yet!
Be the first to write a review