FMS Logo


  • Part Number: FMS11203RTRYL
  • Brand: FMS
  • Availability: In Stock
RRP : £259.99 Where To Buy?


To create this officially licensed RC version of the TOYOTA FJ45, FMS restores the real thing, and the degree of restoration is no less than that of the static model.

The hood hinge is the same hinge as the real car, and it looks slim and beautiful on the 1/12 model car. The motor, steering servo and 2-in-1 integrated ESC / receiver are all hidden under the hood, along with the battery, for easy installation. The doors on both sides can be opened, the front wind shield can be folded forward and if the roof is removed at the same time, it can be transformed into a convertible. If the screws on the slender hinges of the doors are removed, the doors can be removed, showing a more simple and wild asthetic. At this time, the cockpit is more transparent, the steering linkage action of steering wheel can be seen at a glance, and it is also more convenient to carry 1/12 flexible figures.

The two-speed gearbox provides powerful torque. Metal gears carry power, allowing it to move forward slowly even if it is fully loaded with gravel. The TOYOTA logo on the rear of the car restores the stereoscopic stamping effect of the steel plate of the real car. The tailgate can be opened to load extra-long "cargo". There are two sets of tail-lights on the left and right of the tailgate, each set includes a turn signal, a brake light, and a reversing light. With the input of the light control button on the transmitter, the linkage effect is consistent with the driving action. The front headlights have linkage effect of far and near beam and turn signal.


  • Ready To Run Model
  • Two Speed Transmission
  • Full Set Of Bearings
  • Polystyrene Painted Body
  • Hood Can Be Opened
  • Both Side Doors Can Be Opened
  • Tailgate Can Be Opened
  • Super Exquisite Interior
  • Steel C-channel Frame
  • Leaf Spring Suspension
  • Remote Control Lighting System
  • 180 Motor


Length: 345mm
Width: 127mm
Height: 124mm
Wheel Base: 270mm
Tyre: D:60mm , W:15mm
Ground Clearance: 29mm
Approach Angle: 58°
Departure Angle: 29.9°
The Highest Driving Speed: 8km/h
Remote Control Distance: 30m
Play Time: 20 minute

What's Included

  • 1 x 1:12 Toyota FJ45 RTR
  • 1 x 2.4G Transmitter
  • 1 x 2-in-1 Receiver (installed)
  • 1 x 180 Brushed Motor (installed)
  • 1 x 9g Plastic Digital Servo (installed)
  • 1 x 2S 7.4V 380mAh Battery with PCM
  • 1 x USB Charger
  • 1 x Hex Wrench Socket
  • 1 x Product Manual

Needed To Complete

  • 4 x AAA Batteries for Transmitter

KEY: Out of stock OUT OF STOCK Only a few remaining VERY LOW STOCK Low stock LOW STOCK In Stock IN STOCK

Related Products


There are NO reviews of the FMS TOYOTA FJ45 1/12TH SCALER RTR YELLOW yet!
Be the first to write a review